Category: 5×10 Devlin Skiff

May 19, 2012 worked from 9:30 am – noon. I painted the inside with its first coat and added another coat of varnish.

May 18, 2012 Today I flipped the boat and put on the 1st coat of varnish, this took 30 minutes. Then I hit the river with my friend Franz that has been sailing for well over 50 years and has a chest full of sailing trophies. We sailed for 3 wonderful hours. Frans has never…

May 17, 2012 worked from 10 am – noon. I sanded the 1st cost with 220 git and applied the second coat of Pettit Easyepoxy. I had a couple of visitors this morning. This Doe and here Fawn hung around for nearly 2 hours.

May 16, 2012. Last night after having dinner with a friend on the south side of Welcome Slough, I spent 2 hours faring the hull that was coated with West 410 faring compound and put the first coat of Pettit EasyEpoxy on the hull. I shut off the shop light at 11 pm. I believe…

May 16, 2012 This morning I worked from 8am-10am and fared the hull and put a coat of 410 fairing compound on it.

May 15, 2012. I worked for 3pm-8pm. Today I built the keel shoe, skeg and stem. Then laid down the fiberglass cloth and then bedded the skeg, keel shoe and stem with thickened epoxy.

May 11, 2012 worked from 8am-noon. Today I built the seating and oarlock bases. I then disassembled all and re-fit them with epoxy. Then I steamed the gunwales and fit them with clamps and screws. They will dry to shape overnight.

May 10, 2012 worked from 8am-1pm. Today I sanded the inside fare ready for paint. Then built and fit the un-wales, breast hook, knees, and oar lock mount supports.

May 9 2012, worked from 11am-1pm. I took off the high spots with 60 grit and hit the complete interior with 410 faring compound.

May 8th 2012, worked from 4:30pm-8pm. Today I removed the wire stitches and fare and filled the inside seams. Then glassed all those same seams.