Author: coffeeadmin

January 10, 2012; 1:30 pm – 5:30 pm; day 44. I put the 1st coat of varnish on the fir superstructure and the redwood galley. Then I cut, glued and clamped the gunwale clamps.

January 8, 2012; 8:00 am – 1:30 pm; day 43 (218.5 single man hours to date). Today I hand planed the superstructure bulkheads and beams to there proper shapes. Then sanded, prepping for varnish. I made some fir plugs and glued them in. Then I set up the 15″ planner and planned some beautiful tight…

January 7, 2012; 8:30 am – 3:30 pm; day 42. Today I continued the building of the superstructure. As you can see her lines are starting to show. I also posted a photo of this evening’s sunset on the north side of Puget Island.

January 6, 2012; 9:00 am – 2:30 pm; day 41. Today I planed, cut and fit full 1″ old growth fir to the bulkheads. These 1″ fir boards act as part of the main super structure for the cabin and decking. There is and old saying about boat building “you can’t have to many clamps”.

January 5, 2012; 9:00 am – 2:30 pm; day 40. Today I finished building the redwood galley shelving and cubbies for plates, coffee mugs and such. I then put the 1st coat of varnish on the galley redwood, alder floor board and the centerboard trunk cap. I installed the centerboard itself compete with line and…

January 4, 2012; 9:00 am – 3:00 pm; day 39. Today I cut and fit the 1″x10″ alder floor boards and roughed in the galley. Tomorrow I’ll sand and varnish them.

December 29, 2011; 1:00 pm-4:30 pm; day 38. Today, I sanded the 2nd coat with 220 grit, cleaned and applied the 3rd coat.

December 28, 2011; 6:00 am – noon; day 37. Today I sanded the first coat with 120 grit, prepped and painted the 2nd coat of interior paint. One more to go!

December 23, 2011; 7:30 am – noon; day 36. Today, I put on the first of three coats of paint on the interior of the Eider.

December 22, 2011; 9:00 am – 3:00 pm; day 35. Today, I sanded the interior for the 1st coat of paint.